Mobile Water Treatment Systems
Product Details & Specifications
Mobile water treatment systems with net production of 100–1,000 m³/day, configured for emergency supply, disaster recovery and remote sites. Diesel generator and site-power options are available.
GlobalUF offers project-configured mobile water treatment systems for EPC contractors, equipment integrators and water-supply projects. Treatment can combine pretreatment, ultrafiltration (UF), reverse osmosis (RO), disinfection and storage interfaces according to the source water and required water quality. A packaged diesel generator and a compatible site-power connection can be specified for locations with unreliable electricity.
What Is a Mobile Water Treatment System?
A mobile water treatment system is a transportable treatment package assembled in a container, on a skid or on a suitable trailer. It treats an available water source for a specified use where permanent infrastructure is unavailable, damaged or temporarily out of service. The treatment process depends on the water source: freshwater filtration, brackish-water desalination and seawater desalination require different configurations.
Mobility describes how the equipment is transported. Successful operation also requires a suitable intake, power supply, waste-water handling, treated-water storage and trained operators.
Choose the Process for Your Water Source
| System option | Typical source | Treatment objective | Selection considerations |
|---|---|---|---|
| Mobile UF system | Fresh surface water or suitable freshwater supplies | Reduce suspended solids and provide a membrane filtration barrier before disinfection | High turbidity may require clarification; UF does not remove dissolved salts |
| Mobile brackish-water RO system | Brackish groundwater or saline-intrusion sources | Reduce dissolved salts to meet the agreed product-water specification | Confirm feed chemistry, scaling risk, pretreatment and concentrate disposal |
| Mobile seawater RO system | Seawater or suitable coastal intakes | Desalination for the specified end use | Requires seawater-rated equipment, appropriate pretreatment and a separate pressure and energy assessment |
RO is not required for every emergency water source. Freshwater with suspended solids may be better served by suitable pretreatment, UF and disinfection. Oil, industrial chemicals or unidentified contamination require a specific assessment before a treatment route can be selected.
Typical Treatment Processes
Freshwater UF route:
Intake screening → pretreatment selected for source conditions → UF → disinfection and required contact time → closed treated-water storage → distribution.
Brackish-water RO route:
Intake → pretreatment → cartridge filtration → high-pressure pump → BWRO → product-water conditioning where required → disinfection → closed storage and distribution.
Seawater RO route:
Seawater intake → suitable pretreatment → cartridge filtration → seawater high-pressure system → SWRO → remineralization/pH adjustment where required → disinfection → closed storage and distribution.
Chemical dosing, membrane-compatible dechlorination, backwashing, flushing and cleaning arrangements are selected for the actual process. RO concentrate, filter backwash and cleaning waste need defined collection or disposal routes. These process outlines are not installation drawings.
Diesel Generator and Site-Power Operation
A diesel generator package can provide power where the electricity network is unavailable or unreliable. Where a suitable three-phase supply is available, the system can be configured to operate from site power through a correctly specified changeover arrangement.
The electrical package is selected around the complete operating load, motor-starting requirements, voltage, frequency, ambient conditions and intended duty. Generator rating is project-specific; it is not selected from water-production capacity alone.
Items to define in the quotation include:
- Enclosed diesel generator, fuel storage arrangement and required operating duty.
- Generator and site-power connections, with suitable isolation and changeover protection.
- Manual changeover or automatic transfer equipment where specified.
- Pump starting method, control power, earthing and electrical protection.
- Cable lengths, routing and site installation responsibilities.
The generator is positioned with appropriate ventilation, exhaust clearance and maintenance access. Fuel handling is kept separate from treated-water storage. Automatic transfer does not mean uninterrupted water production; controls and storage must accommodate the agreed restart sequence.

Configuration and Supply Scope
Each mobile water treatment package is specified against the project requirements. The quotation identifies what is included, optional or supplied by the customer.
| Item | Configuration to agree |
|---|---|
| Net water production | 100–1,000 m³/day; final configuration depends on feedwater conditions, daily operating hours and allowances for cleaning or downtime |
| Feedwater envelope | Source, salinity, temperature, turbidity and relevant chemical and microbiological parameters |
| Treated-water requirement | Intended use and applicable acceptance criteria |
| Transport format | Container or skid; trailer integration subject to payload, dimensions and destination requirements |
| Treatment equipment | Pretreatment, UF/BWRO/SWRO, dosing, disinfection and cleaning equipment as applicable |
| Power | Site voltage/frequency/phase; generator and changeover equipment where specified |
| Controls and instruments | Operating sequence, alarms, flow/pressure monitoring and water-quality measurements appropriate to the process |
| Storage and distribution | Raw-water buffer, treated-water tank, transfer pumps, hoses and distribution interfaces where included |
| Site conditions | Access, lifting, foundations/supports, climate protection and discharge arrangements |
| Handover | Agreed drawings, equipment list, manuals, test records and spare-parts list |

Separate Raw-Water Storage and Treated-Water Distribution
Where storage is included, the raw-water tank supplies the treatment-system inlet. In an RO configuration, a separate product-water line carries treated water to the product-water tank, with appropriate conditioning and disinfection specified for the intended use. The product-water tank then supplies the distribution point through its own outlet. Raw water must not bypass treatment into the product-water tank or public taps.
Tank volumes, transfer pumps, disinfection contact time and distribution pressure are selected for the actual production schedule and peak demand. The equipment service area should remain separate from public water collection.
Applications
Emergency and Disaster-Recovery Water Supply
Mobile treatment can support temporary supply while damaged water infrastructure is repaired. Source assessment, site access and downstream distribution are considered alongside treatment capacity. Intake and treatment equipment must be placed where they can be operated and maintained safely.
Post-Conflict Reconstruction and Temporary Settlements
Projects restoring community water supply may need a transportable treatment package before permanent infrastructure becomes available. The specification should address sustained operation, fuel availability, local operator capability, spare parts and storage—not only initial delivery.
Remote Camps and Construction Projects
Remote worksites can use a mobile package to treat a suitable local source for an agreed domestic or process-water requirement. Water demand, seasonal source changes and resupply of chemicals and consumables determine the operating plan.
Temporary Utility and Industrial Supply
Mobile equipment can provide a project-specific treatment stage during infrastructure upgrades or interruptions. Industrial product-water targets must be specified separately from domestic water requirements.

From Requirements to Factory Testing
- Review the source and duty. Provide available water analysis, daily demand, end use and site information.
- Define the package. Agree the treatment route, net output basis, power arrangement, storage interfaces and supply boundaries.
- Approve the layout. Review process and general-arrangement drawings, electrical interfaces and access for operation and maintenance.
- Manufacture and test. Agree factory inspection, leak testing, control checks and acceptance criteria before testing. Factory test-water conditions must be distinguished from the site feedwater.
- Prepare deployment. Confirm transport, unloading, installation, commissioning support and operator handover responsibilities.
For equipment integrators, branding and build-to-spec cooperation can be discussed through our UF and RO system OEM manufacturing service.
For a brackish-water RO package housed in a container, see Containerized BWRO Systems.
Frequently Asked Questions
Can a mobile water treatment system operate without grid electricity?
Yes, when a suitable diesel generator and the required electrical equipment are included. Fuel supply, generator duty, maintenance and motor-starting loads must be considered. The system still requires an accessible water source and an operating plan.
Can the same system connect to site electricity?
Yes. A compatible site-power input and changeover arrangement can be specified. Voltage, frequency, phase and protection requirements must match the destination supply. Manual or automatic transfer is agreed in the electrical scope.
Is reverse osmosis necessary for disaster-relief water treatment?
Not always. RO is selected when dissolved-salt reduction or another defined treatment objective requires it. Suitable freshwater may instead use pretreatment, UF and disinfection. The source-water assessment determines the route.
Can one mobile RO unit treat both brackish water and seawater?
Not automatically. Seawater service requires a suitable pressure rating, pump, membranes, materials and pretreatment. A brackish-water unit should not be assumed suitable for seawater unless that operating envelope is explicitly designed and verified.
How much water can the system produce?
The product range covers net water production of 100–1,000 m³/day. The final configuration is specified for the actual feedwater conditions and daily operating schedule. State both the hourly requirement and daily delivered volume. Backwashing, cleaning, flushing, downtime and distribution losses must be considered when sizing the complete supply package.
How quickly can it be put into operation?
Deployment time depends on equipment availability, shipping, road access, unloading, intake preparation, power connections and commissioning. The project schedule distinguishes manufacturing lead time from installation and startup after arrival.
Can the treated water be used for drinking?
The system must be designed and operated to meet the applicable drinking-water requirements, including suitable disinfection and protected storage. Water-quality verification at commissioning and during operation is necessary; selecting UF or RO alone does not establish compliance.
What affects the price?
Price depends on the source-water quality, required output, treatment route, materials, transport format, generator, storage, controls, testing and site-support scope. A comparable quotation needs clear equipment and service boundaries.
Request a Mobile Water Treatment System Quotation
Tell us your water source, required daily production, destination and intended use. Include a recent water analysis if available, and indicate whether you need a diesel generator, site-power connection or both.
Use the inquiry form below to share your project requirements and request a configuration proposal.
Request a Quote for This Product
Discuss your water treatment needs with our experts. We'll get back to you within 24 hours.