| pH | 7.48 | pH Units | Context only — no numeric pass/failNo health-based guideline. Optimum operational pH varies with water and materials, usually 6.5–8.5; chlorine disinfection preferably below pH 8. These are process conditions, not raw-water pass/fail limits.Source · PDF page 274 | Context onlyNo health-based guideline. Optimum operational pH varies with water and materials, usually 6.5–8.5; chlorine disinfection preferably below pH 8. These are process conditions, not raw-water pass/fail limits. |
|---|
| Color | 64 | PtCo | Context only — no standalone numeric pass/failNo health-based guideline. Colour below 15 true colour units (TCU) is usually acceptable; reporting scale must be confirmed.Source · PDF page 271 | Context onlyNo health-based guideline. Colour below 15 true colour units (TCU) is usually acceptable; reporting scale must be confirmed. |
|---|
| Turbidity | 10 | NTU | Context only — no numeric pass/failOperational target, not a raw-water health limit. WHO describes large supplies achieving 0.5 NTU before disinfection at all times and an average of 0.2 NTU or less; small-supply feasibility differs.Source · PDF page 275 | Context onlyOperational target, not a raw-water health limit. WHO describes large supplies achieving 0.5 NTU before disinfection at all times and an average of 0.2 NTU or less; small-supply feasibility differs. |
|---|
| Electrical Conductivity(EC) | 2830 | μS/cm | Context only — no numeric pass/failNo WHO numeric drinking-water guideline used here. It describes ionic conductivity, not drinking-water safety.Source · PDF page 90 | Context onlyNo WHO numeric drinking-water guideline used here. It describes ionic conductivity, not drinking-water safety. |
|---|
| TDS | 1778 | Mg/l | Context only — no numeric pass/failNo health-based guideline. WHO describes palatability as generally good below about 600 mg/L and increasingly poor above about 1000 mg/L.Source · PDF page 275 | Palatability not determinedTDS alone cannot establish drinking-water safety. A comparable numeric result is required. |
|---|
| Calcium Hardness | 152 | Mg/l Ca2+ (CaCO3) | Context only — no numeric pass/failNo health-based guideline. Assess scaling and treatment requirements for the intended use.Source · PDF page 272 | Context onlyNo health-based guideline. Assess scaling and treatment requirements for the intended use. |
|---|
| Magnesium Hardness | 24 | Mg/l Mg2+ (CaCO3) | Context only — no numeric pass/failNo health-based guideline. Assess scaling and treatment requirements for the intended use.Source · PDF page 272 | Context onlyNo health-based guideline. Assess scaling and treatment requirements for the intended use. |
|---|
| Total Hardness | 176 | Mg/l CaCO3 | Context only — no numeric pass/failNo health-based guideline. Assess scaling and treatment requirements for the intended use.Source · PDF page 272 | Context onlyNo health-based guideline. Assess scaling and treatment requirements for the intended use. |
|---|
| Phenolphthalein Alkalinity | ND | Mg/l CaCO3 | Context only — no standalone numeric pass/failNo numeric WHO drinking-water guideline is used in this library. Assess buffering, pH and scaling in process design.Source · PDF page 274 | Context onlyNo numeric WHO drinking-water guideline is used in this library. Assess buffering, pH and scaling in process design. |
|---|
| Total Alkalinity | 1014 | Mg/l CaCO3 | Context only — no standalone numeric pass/failNo numeric WHO drinking-water guideline is used in this library. Assess buffering, pH and scaling in process design.Source · PDF page 274 | Context onlyNo numeric WHO drinking-water guideline is used in this library. Assess buffering, pH and scaling in process design. |
|---|
| Calcium | 61 | Mg/l Ca2+ | Not configured | Not assessedNo matching reference configured; do not infer that WHO has no guidance. |
|---|
| Magnesium | 6 | Mg/l Mg2+ | Not configured | Not assessedNo matching reference configured; do not infer that WHO has no guidance. |
|---|
| Sodium, Na | 500 | Mg/l Na | Context only — no numeric pass/failNo health-based guideline. The average taste threshold is about 200 mg/L.Source · PDF page 274 | Context onlyNo health-based guideline. The average taste threshold is about 200 mg/L. |
|---|
| *Potassium | 25 | Mg/l K | Context only — no numeric pass/failNo health-based guideline established.Source · PDF page 579 | Context onlyNo health-based guideline established. |
|---|
| Chlorides | 50 | Mg/l Cl | Context only — no numeric pass/failNo health-based guideline. Taste becomes more noticeable above about 250 mg/L.Source · PDF page 270 | Context onlyNo health-based guideline. Taste becomes more noticeable above about 250 mg/L. |
|---|
| Sulphate, SO4 | 110 | Mg/l SO4 | Context only — no numeric pass/failNo health-based guideline. Taste depends on the associated cation.Source · PDF page 275 | Context onlyNo health-based guideline. Taste depends on the associated cation. |
|---|
| Fluorides | 6.9 | Mg/l F | 1.5 mg/LConsider total intake and water consumption when setting national standards.Source · PDF page 581 | Not assessedUnit not confirmed for comparison (reported: Mg/l F). |
|---|
| Nitrate | 9 | NO3- | 50 mg/L as NO3 ionAs NO3 ion. Also assess nitrate/50 + nitrite/3 <= 1, both as ions in mg/L.Source · PDF page 582 | Not assessedUnit not confirmed for comparison (reported: NO3-). |
|---|
| Nitrate N | 2.1 | Mg/l NO3N | 50 mg/L as NO3 ionAs NO3 ion. Also assess nitrate/50 + nitrite/3 <= 1, both as ions in mg/L.Source · PDF page 582 | Not assessedUnit not confirmed for comparison (reported: Mg/l NO3N). |
|---|
| *Nitrite N | 0.0 | Mg/l NO2-N | 3 mg/L as NO2 ionAs NO2 ion. Also assess nitrate/50 + nitrite/3 <= 1, both as ions in mg/L.Source · PDF page 582 | Not assessedUnit not confirmed for comparison (reported: Mg/l NO2-N). |
|---|
| *Nitrites | 0 | Mg/l NO2 | 3 mg/L as NO2 ionAs NO2 ion. Also assess nitrate/50 + nitrite/3 <= 1, both as ions in mg/L.Source · PDF page 582 | Not assessedUnit not confirmed for comparison (reported: Mg/l NO2). |
|---|
| *Ammonia | 0.01 | NH3 | Context only — no numeric pass/failNo health-based guideline. It can be relevant to treatment and disinfection.Source · PDF page 270 | Context onlyNo health-based guideline. It can be relevant to treatment and disinfection. |
|---|
| *Ammonical Nitrogen | 0.01 | NH3-N | Context only — no numeric pass/failNo health-based guideline. It can be relevant to treatment and disinfection.Source · PDF page 270 | Context onlyNo health-based guideline. It can be relevant to treatment and disinfection. |
|---|
| *Ammonium | 0.01 | NH4+ | Context only — no numeric pass/failNo health-based guideline. It can be relevant to treatment and disinfection.Source · PDF page 270 | Context onlyNo health-based guideline. It can be relevant to treatment and disinfection. |
|---|
| Iron, Fe | 3.49 | Mg/l Fe | Context only — no numeric pass/failNo health-based guideline; taste, colour and deposits can affect acceptability.Source · PDF page 273 | Context onlyNo health-based guideline; taste, colour and deposits can affect acceptability. |
|---|
| Manganese, Mn | 0.06 | Mg/l Mn | 0.08 mg/L (provisional)Total manganese; aesthetic concerns also apply. Provisional guideline; flags P.Source · PDF page 582 | Not assessedUnit not confirmed for comparison (reported: Mg/l Mn). |
|---|
| Aluminium, Al | 0.06 | Mg/l Al | Context only — no numeric pass/failNo guideline value. Coagulation-process optimization levels are not raw-water safety limits.Source · PDF page 270 | Context onlyNo guideline value. Coagulation-process optimization levels are not raw-water safety limits. |
|---|
| Copper, Cu | 0.11 | Mg/l Cu | 2 mg/LStaining can occur below the guideline.Source · PDF page 580 | Not assessedUnit not confirmed for comparison (reported: Mg/l Cu). |
|---|
| Barium | 0 | Mg/L Ba2+ | 1.3 mg/LHealth-based guideline; consult the chemical fact sheet for application.Source · PDF page 580 | Not assessedUnit not confirmed for comparison (reported: Mg/L Ba2+). |
|---|
| *Silica | 50 | Mg/l SiO2 | Not configured | Not assessedNo matching reference configured; do not infer that WHO has no guidance. |
|---|
| *Silicon | 23 | Mg/l | Not configured | Not assessedNo matching reference configured; do not infer that WHO has no guidance. |
|---|
| Bicarbonates | 1014 | Mg/l HCO3- | Not configured | Not assessedNo matching reference configured; do not infer that WHO has no guidance. |
|---|
| Carbonates | 0 | Mg/l CO²⁻ ₃ | Not configured | Not assessedNo matching reference configured; do not infer that WHO has no guidance. |
|---|
| Phosphates | 0.64 | Mg/lPO₄³⁻ | Not configured | Not assessedNo matching reference configured; do not infer that WHO has no guidance. |
|---|
| Salinity | 1.42 | ppt | Not configured | Not assessedNo matching reference configured; do not infer that WHO has no guidance. |
|---|
| Total Suspended Solids(TSS) | 21 | Mg/l | Not configured | Not assessedNo matching reference configured; do not infer that WHO has no guidance. |
|---|
| Total Viable Count at 37°c | TN | CFU/ml | Not configured | Not assessedNo matching reference configured; do not infer that WHO has no guidance. |
|---|
| E. Coli | TN | CFU/100ml | Not detectable in 100 mLWHO 2026, Table 7.10; criterion for water intended for drinking.Source · PDF page 190 | Not assessedA censored count does not establish non-detection in 100 mL. |
|---|
| Total Coliforms | TN | CFU/100ml | Context only — no numeric pass/failNot a substitute for E. coli testing; WHO does not use total coliforms as the indicator of sanitary quality in this comparison.Source · PDF page 190 | Context onlyNot a substitute for E. coli testing; WHO does not use total coliforms as the indicator of sanitary quality in this comparison. |
|---|