Mexico groundwater sample MX-04
Groundwater analysis for this sample, with English reporting and a WHO drinking-water reference comparison.
Sample evidence summary
MX-04 documents a groundwater source in Guanajuato, Mexico. The reported source is Customer-supplied water analysis. Use the selected measurements below alongside the complete results table and the source limitations when defining project requirements.
MX-04 records groundwater results for Guanajuato, Mexico. Source: Customer-supplied water analysis.
- pH: 7.24 — (as reported).
- Nitrate (N-NO3): 1.12 mg/L (as reported).
- Iron: 0.0020 mg/L (as reported).
- Manganese: 0.0007 mg/L (as reported).
This summary reproduces selected reported results; it is not a complete drinking-water safety assessment. Dates and reporting limitations are shown below.
- Country
- Mexico
- Area
- Guanajuato
- Water source
- Groundwater
- Sample ID
- MX-04
- Sampling date / period
- Not supplied
- Report date
- Not supplied
- Source
- Customer-supplied water analysis
- Version
- 1
Results and WHO comparison
| Parameter | Reported result | Unit | WHO reference | Comparison |
|---|---|---|---|---|
| pH | 7.24 | — | Context only — no numeric pass/failNo health-based guideline. Optimum operational pH varies with water and materials, usually 6.5–8.5; chlorine disinfection preferably below pH 8. These are process conditions, not raw-water pass/fail limits.Source · PDF page 274 | Context onlyNo health-based guideline. Optimum operational pH varies with water and materials, usually 6.5–8.5; chlorine disinfection preferably below pH 8. These are process conditions, not raw-water pass/fail limits. |
| Electrical conductivity | 0.56 | dS/m | Context only — no numeric pass/failNo WHO numeric drinking-water guideline used here. It describes ionic conductivity, not drinking-water safety.Source · PDF page 90 | Context onlyNo WHO numeric drinking-water guideline used here. It describes ionic conductivity, not drinking-water safety. |
| Total hardness | 11.48 | °f | Context only — no numeric pass/failNo health-based guideline. Assess scaling and treatment requirements for the intended use.Source · PDF page 272 | Context onlyNo health-based guideline. Assess scaling and treatment requirements for the intended use. |
| Calcium | 40.5 | mg/L | Not configured | Not assessedNo matching reference configured; do not infer that WHO has no guidance. |
| Calcium | 2.02 | meq/L | Not configured | Not assessedNo matching reference configured; do not infer that WHO has no guidance. |
| Magnesium | 3.40 | mg/L | Not configured | Not assessedNo matching reference configured; do not infer that WHO has no guidance. |
| Magnesium | 0.28 | meq/L | Not configured | Not assessedNo matching reference configured; do not infer that WHO has no guidance. |
| Sodium | 69.0 | mg/L | Context only — no numeric pass/failNo health-based guideline. The average taste threshold is about 200 mg/L.Source · PDF page 274 | Context onlyNo health-based guideline. The average taste threshold is about 200 mg/L. |
| Sodium | 3 | meq/L | Context only — no numeric pass/failNo health-based guideline. The average taste threshold is about 200 mg/L.Source · PDF page 274 | Context onlyNo health-based guideline. The average taste threshold is about 200 mg/L. |
| Sodium adsorption ratio | 2.80 | — | Context only — no numeric pass/failNo health-based guideline. The average taste threshold is about 200 mg/L.Source · PDF page 274 | Context onlyNo health-based guideline. The average taste threshold is about 200 mg/L. |
| Potassium | 11.7 | mg/L | Context only — no numeric pass/failNo health-based guideline established.Source · PDF page 579 | Context onlyNo health-based guideline established. |
| Potassium | 0.3 | meq/L | Context only — no numeric pass/failNo health-based guideline established.Source · PDF page 579 | Context onlyNo health-based guideline established. |
| Bicarbonate | 287 | mg/L | Not configured | Not assessedNo matching reference configured; do not infer that WHO has no guidance. |
| Bicarbonate | 4.71 | meq/L | Not configured | Not assessedNo matching reference configured; do not infer that WHO has no guidance. |
| Carbonate | 0.00 | mg/L | Not configured | Not assessedNo matching reference configured; do not infer that WHO has no guidance. |
| Carbonate | 0 | meq/L | Not configured | Not assessedNo matching reference configured; do not infer that WHO has no guidance. |
| Chloride | 9.10 | mg/L | Context only — no numeric pass/failNo health-based guideline. Taste becomes more noticeable above about 250 mg/L.Source · PDF page 270 | Context onlyNo health-based guideline. Taste becomes more noticeable above about 250 mg/L. |
| Chloride | 0.26 | meq/L | Context only — no numeric pass/failNo health-based guideline. Taste becomes more noticeable above about 250 mg/L.Source · PDF page 270 | Context onlyNo health-based guideline. Taste becomes more noticeable above about 250 mg/L. |
| Sulfate (S-SO4) | 5.61 | mg/L | Context only — no numeric pass/failNo health-based guideline. Taste depends on the associated cation.Source · PDF page 275 | Context onlyNo health-based guideline. Taste depends on the associated cation. |
| Sulfate (S-SO4) | 0.35 | meq/L | Context only — no numeric pass/failNo health-based guideline. Taste depends on the associated cation.Source · PDF page 275 | Context onlyNo health-based guideline. Taste depends on the associated cation. |
| Nitrate (N-NO3) | 1.12 | mg/L | 50 mg/L as NO3 ionAs NO3 ion. Also assess nitrate/50 + nitrite/3 <= 1, both as ions in mg/L.Source · PDF page 582 | At or below referenceCalculated as NO3 from the reported nitrogen basis. Comparison value: 4.96 mg/L. |
| Nitrate (N-NO3) | 0.08 | meq/L | 50 mg/L as NO3 ionAs NO3 ion. Also assess nitrate/50 + nitrite/3 <= 1, both as ions in mg/L.Source · PDF page 582 | Not assessedUnit not confirmed for comparison (reported: meq/L). |
| Iron | 0.0020 | mg/L | Context only — no numeric pass/failNo health-based guideline; taste, colour and deposits can affect acceptability.Source · PDF page 273 | Context onlyNo health-based guideline; taste, colour and deposits can affect acceptability. |
| Manganese | 0.0007 | mg/L | 0.08 mg/L (provisional)Total manganese; aesthetic concerns also apply. Provisional guideline; flags P.Source · PDF page 582 | At or below referenceCompared on the reported analytical basis. |
| Copper | 0.0002 | mg/L | 2 mg/LStaining can occur below the guideline.Source · PDF page 580 | At or below referenceCompared on the reported analytical basis. |
| Zinc | 0.0090 | mg/L | Context only — no numeric pass/failNo health-based guideline; acceptability can be affected.Source · PDF page 276 | Context onlyNo health-based guideline; acceptability can be affected. |
| Arsenic | 0.0077 | mg/L | 0.01 mg/L (provisional)Health-based guideline; consult the chemical fact sheet for application. Provisional guideline; flags A,T.Source · PDF page 580 | At or below referenceCompared on the reported analytical basis. |
| Boron | 0.06 | mg/L | 2.4 mg/LHealth-based guideline; consult the chemical fact sheet for application.Source · PDF page 580 | At or below referenceCompared on the reported analytical basis. |
| Adjusted sodium adsorption ratio | 3.49 | — | Not configured | Not assessedNo matching reference configured; do not infer that WHO has no guidance. |
| Sum of anions | 5.4 | meq/L | Not configured | Not assessedNo matching reference configured; do not infer that WHO has no guidance. |
| Sum of cations | 5.6 | meq/L | Not configured | Not assessedNo matching reference configured; do not infer that WHO has no guidance. |
SAMPLE MX-04 · REFERENCE SCREENING
What these results indicate
No exceedance was identified among the results that could be compared. This does not establish that the water meets all WHO guidance: unassessed results, missing tests and source conditions remain relevant.
Nitrate and nitrite together: the combined WHO ratio also needs checking. Two exact results on compatible analytical bases were not available for that calculation.
Microbial evidence gap: this record has no separately identified E. coli or thermotolerant/faecal coliform result. Total coliforms and general bacterial counts do not replace that test.
Unresolved comparisons: review the reasons beside each result. ND/BLQ without a numeric limit, ambiguous units and unspecified chemical forms are not counted as compliant results.
Treatment options for this sample
No configured treatment trigger could be established from the reported values and units. Confirm the intended use, missing tests and ambiguous units before selecting a process.
Automatically generated screening from this sample record and the cited reference set. This is not an engineer-approved design, a national compliance certificate or a declaration that untreated water is safe to drink.
Source and interpretation
Results describe this sample only. They do not represent country-wide conditions or establish drinking-water safety.
This is a sample record, not a treatment specification. A process design needs a current, representative source-water analysis and the intended product-water requirements.
WHO drinking-water guidance is used for screening, not certification of untreated source water. TDS categories describe palatability, not overall drinking-water safety. Original dates and laboratory details remain in the source archive.
Download WHO Drinking-water Quality Guidelines (2026 PDF)WHO source document · PDF · approximately 6 MB
FROM WATER ANALYSIS TO PROJECT REQUIREMENTS
Discuss your water quality with our engineering team
Tell us about your source water, required capacity and intended use. Our team can help review the data and define the next engineering steps.