Back to Water Map

Mongolia groundwater sample MN-06

Groundwater analysis for this sample, with English reporting and a WHO drinking-water reference comparison.

Sample evidence summary

MN-06 documents a groundwater source in Sergelen, Töv, Mongolia. The reported source is Central laboratory of water inspection. Use the selected measurements below alongside the complete results table and the source limitations when defining project requirements.

MN-06 records groundwater results for Sergelen, Töv, Mongolia. Source: Central laboratory of water inspection.

  • pH: 8.13 (as reported).
  • Turbidity: 0.09 NTU (as reported).
  • TDS: 362 mg/L (as reported).
  • Nitrate: 3.94 mg N/L (as reported).
  • Iron: 0.04 mg/L (as reported).

This summary reproduces selected reported results; it is not a complete drinking-water safety assessment. Dates and reporting limitations are shown below.

Explore water reports from Mongolia

Country
Mongolia
Area
Sergelen, Töv
Water source
Groundwater
Sample ID
MN-06
Sampling date / period
Date needs verification
Report date
Date needs verification
Source
Central laboratory of water inspection
Version
1

Results and WHO comparison

Analysis results for sample MN-06
ParameterReported resultUnitWHO referenceComparison
pH8.13—Context only — no numeric pass/failNo health-based guideline. Optimum operational pH varies with water and materials, usually 6.5–8.5; chlorine disinfection preferably below pH 8. These are process conditions, not raw-water pass/fail limits.Source · PDF page 274Context onlyNo health-based guideline. Optimum operational pH varies with water and materials, usually 6.5–8.5; chlorine disinfection preferably below pH 8. These are process conditions, not raw-water pass/fail limits.
Turbidity0.09NTUContext only — no numeric pass/failOperational target, not a raw-water health limit. WHO describes large supplies achieving 0.5 NTU before disinfection at all times and an average of 0.2 NTU or less; small-supply feasibility differs.Source · PDF page 275Context onlyOperational target, not a raw-water health limit. WHO describes large supplies achieving 0.5 NTU before disinfection at all times and an average of 0.2 NTU or less; small-supply feasibility differs.
EC0.52mS/cmContext only — no numeric pass/failNo WHO numeric drinking-water guideline used here. It describes ionic conductivity, not drinking-water safety.Source · PDF page 90Context onlyNo WHO numeric drinking-water guideline used here. It describes ionic conductivity, not drinking-water safety.
TDS362mg/LContext only — no numeric pass/failNo health-based guideline. WHO describes palatability as generally good below about 600 mg/L and increasingly poor above about 1000 mg/L.Source · PDF page 275Generally good palatabilityPalatability screening only, not a health-based pass/fail. The 600–1000 mg/L review band is a GlobalUF display grouping. TDS alone does not establish drinking-water safety.
Total hardness4.4mg-eq/LContext only — no numeric pass/failNo health-based guideline. Assess scaling and treatment requirements for the intended use.Source · PDF page 272Context onlyNo health-based guideline. Assess scaling and treatment requirements for the intended use.
Calcium71.34mg/LNot configuredNot assessedNo matching reference configured; do not infer that WHO has no guidance.
Magnesium10.2mg/LNot configuredNot assessedNo matching reference configured; do not infer that WHO has no guidance.
Sodium + Potassium19.82mg/LContext only — no numeric pass/failNo health-based guideline. The average taste threshold is about 200 mg/L.Source · PDF page 274Context onlyNo health-based guideline. The average taste threshold is about 200 mg/L.
Bicarbonate207.4mg/LNot configuredNot assessedNo matching reference configured; do not infer that WHO has no guidance.
Carbonate0.1mg/LNot configuredNot assessedNo matching reference configured; do not infer that WHO has no guidance.
Chloride24.11mg/LContext only — no numeric pass/failNo health-based guideline. Taste becomes more noticeable above about 250 mg/L.Source · PDF page 270Context onlyNo health-based guideline. Taste becomes more noticeable above about 250 mg/L.
Sulfate53.67mg/LContext only — no numeric pass/failNo health-based guideline. Taste depends on the associated cation.Source · PDF page 275Context onlyNo health-based guideline. Taste depends on the associated cation.
Nitrate3.94mg N/L50 mg/L as NO3 ionAs NO3 ion. Also assess nitrate/50 + nitrite/3 <= 1, both as ions in mg/L.Source · PDF page 582At or below referenceCalculated as NO3 from the reported nitrogen basis. Comparison value: 17.44857 mg/L.
Nitrite0mg N/L3 mg/L as NO2 ionAs NO2 ion. Also assess nitrate/50 + nitrite/3 <= 1, both as ions in mg/L.Source · PDF page 582At or below referenceCalculated as NO2 from the reported nitrogen basis. Comparison value: 0 mg/L.
Ammonium0.01mg N/LContext only — no numeric pass/failNo health-based guideline. It can be relevant to treatment and disinfection.Source · PDF page 270Context onlyNo health-based guideline. It can be relevant to treatment and disinfection.
Iron0.04mg/LContext only — no numeric pass/failNo health-based guideline; taste, colour and deposits can affect acceptability.Source · PDF page 273Context onlyNo health-based guideline; taste, colour and deposits can affect acceptability.
Cl.perfringensUndetected (ND)Not suppliedNot configuredNot assessedNo matching reference configured; do not infer that WHO has no guidance.
Pseudomonas aeruginosaUndetected (ND)Not suppliedNot configuredNot assessedNo matching reference configured; do not infer that WHO has no guidance.
Salmonella / ShigellaUndetected (ND)Not suppliedNot configuredNot assessedNo matching reference configured; do not infer that WHO has no guidance.
Total microorganisms25CFU (sample volume not supplied)Not configuredNot assessedNo matching reference configured; do not infer that WHO has no guidance.
Coliforms / thermotolerant coliforms / E.coliUndetected (ND)Not suppliedNot configuredNot assessedNo matching reference configured; do not infer that WHO has no guidance.

SAMPLE MN-06 · REFERENCE SCREENING

What these results indicate

0 above reference / detected2 at or below reference / not detected9 not assessed10 context only

No exceedance was identified among the results that could be compared. This does not establish that the water meets all WHO guidance: unassessed results, missing tests and source conditions remain relevant.

Combined nitrate and nitrite: nitrate/50 + nitrite/3 = 0.349 (ion concentrations in mg/L). This is at or below the WHO combined reference of 1. This calculation uses exact, comparable results only.

Microbial evidence gap: this record has no separately identified E. coli or thermotolerant/faecal coliform result. Total coliforms and general bacterial counts do not replace that test.

Unresolved comparisons: review the reasons beside each result. ND/BLQ without a numeric limit, ambiguous units and unspecified chemical forms are not counted as compliant results.

Treatment options for this sample

No configured treatment trigger could be established from the reported values and units. Confirm the intended use, missing tests and ambiguous units before selecting a process.

Automatically generated screening from this sample record and the cited reference set. This is not an engineer-approved design, a national compliance certificate or a declaration that untreated water is safe to drink.

Source and interpretation

Results describe this sample only. They do not represent country-wide conditions or establish drinking-water safety.

This is a sample record, not a treatment specification. A process design needs a current, representative source-water analysis and the intended product-water requirements.

WHO drinking-water guidance is used for screening, not certification of untreated source water. TDS categories describe palatability, not overall drinking-water safety. Original dates and laboratory details remain in the source archive.

Download WHO Drinking-water Quality Guidelines (2026 PDF)WHO source document · PDF · approximately 6 MB

FROM WATER ANALYSIS TO PROJECT REQUIREMENTS

Discuss your water quality with our engineering team

Tell us about your source water, required capacity and intended use. Our team can help review the data and define the next engineering steps.

Consult our engineering team
Email Icon Phone Icon WhatsApp Icon Messenger Icon