Back to Water Map

Kenya groundwater sample KE-07

Groundwater analysis for this sample, with English reporting and a WHO drinking-water reference comparison.

Sample evidence summary

KE-07 documents a groundwater source in Kilifi, Kenya. The reported source is Coast Water Works Development Agency. Use the selected measurements below alongside the complete results table and the source limitations when defining project requirements.

KE-07 records groundwater results for Kilifi, Kenya. Source: Coast Water Works Development Agency.

    This summary reproduces selected reported results; it is not a complete drinking-water safety assessment. Dates and reporting limitations are shown below.

    Explore water reports from Kenya

    Country
    Kenya
    Area
    Kilifi
    Water source
    Groundwater
    Sample ID
    KE-07
    Sampling date / period
    2026-03
    Report date
    2026-03
    Source
    Coast Water Works Development Agency
    Version
    1

    Results and WHO comparison

    Analysis results for sample KE-07
    ParameterReported resultUnitWHO referenceComparison
    Residual chlorine0Not suppliedNot configuredNot assessedNo matching reference configured; do not infer that WHO has no guidance.
    E. coli9MPN/100mLNot detectable in 100 mLWHO 2026, Table 7.10; criterion for water intended for drinking.Source · PDF page 190DetectedAbove the non-detection criterion for drinking-water.
    Total coliform count816MPN/100mLContext only — no numeric pass/failNot a substitute for E. coli testing; WHO does not use total coliforms as the indicator of sanitary quality in this comparison.Source · PDF page 190Context onlyNot a substitute for E. coli testing; WHO does not use total coliforms as the indicator of sanitary quality in this comparison.

    SAMPLE KE-07 · REFERENCE SCREENING

    What these results indicate

    1 above reference / detected0 at or below reference / not detected1 not assessed1 context only

    Priority findings: E. coli. These results exceed the cited drinking-water reference or show detection against a non-detection criterion. Confirm the original results and reporting basis before setting treatment targets.

    Unresolved comparisons: review the reasons beside each result. ND/BLQ without a numeric limit, ambiguous units and unspecified chemical forms are not counted as compliant results.

    Treatment options for this sample

    No configured treatment trigger could be established from the reported values and units. Confirm the intended use, missing tests and ambiguous units before selecting a process.

    Automatically generated screening from this sample record and the cited reference set. This is not an engineer-approved design, a national compliance certificate or a declaration that untreated water is safe to drink.

    Source and interpretation

    Results describe this sample only. They do not represent country-wide conditions or establish drinking-water safety.

    This is a sample record, not a treatment specification. A process design needs a current, representative source-water analysis and the intended product-water requirements.

    WHO drinking-water guidance is used for screening, not certification of untreated source water. TDS categories describe palatability, not overall drinking-water safety. Original dates and laboratory details remain in the source archive.

    Download WHO Drinking-water Quality Guidelines (2026 PDF)WHO source document · PDF · approximately 6 MB

    FROM WATER ANALYSIS TO PROJECT REQUIREMENTS

    Discuss your water quality with our engineering team

    Tell us about your source water, required capacity and intended use. Our team can help review the data and define the next engineering steps.

    Consult our engineering team
    Email Icon Phone Icon WhatsApp Icon Messenger Icon