Back to Water Map

Colombia groundwater sample CO-03

Groundwater analysis for this sample, with English reporting and a WHO drinking-water reference comparison.

Sample evidence summary

CO-03 documents a groundwater source in Location unconfirmed, Colombia. The reported source is Customer-supplied water analysis. Use the selected measurements below alongside the complete results table and the source limitations when defining project requirements.

CO-03 records groundwater results for Location unconfirmed, Colombia. Source: Customer-supplied water analysis.

  • pH: 7.37 (as reported).
  • Turbidity: 110 NTU (as reported).
  • Fluoride: 0.211 mg F/L (as reported).
  • Nitrate: 2.262 mg NO3/L (as reported).

This summary reproduces selected reported results; it is not a complete drinking-water safety assessment. Dates and reporting limitations are shown below.

Explore water reports from Colombia

Country
Colombia
Area
Location unconfirmed
Water source
Groundwater
Sample ID
CO-03
Sampling date / period
2026-08
Report date
Date needs verification
Source
Customer-supplied water analysis
Version
1

Results and WHO comparison

Analysis results for sample CO-03
ParameterReported resultUnitWHO referenceComparison
pH7.37—Context only — no numeric pass/failNo health-based guideline. Optimum operational pH varies with water and materials, usually 6.5–8.5; chlorine disinfection preferably below pH 8. These are process conditions, not raw-water pass/fail limits.Source · PDF page 274Context onlyNo health-based guideline. Optimum operational pH varies with water and materials, usually 6.5–8.5; chlorine disinfection preferably below pH 8. These are process conditions, not raw-water pass/fail limits.
Apparent colour50Platinum-cobalt colour unitsContext only — no standalone numeric pass/failNo health-based guideline. Colour below 15 true colour units (TCU) is usually acceptable; reporting scale must be confirmed.Source · PDF page 271Context onlyNo health-based guideline. Colour below 15 true colour units (TCU) is usually acceptable; reporting scale must be confirmed.
Turbidity110NTUContext only — no numeric pass/failOperational target, not a raw-water health limit. WHO describes large supplies achieving 0.5 NTU before disinfection at all times and an average of 0.2 NTU or less; small-supply feasibility differs.Source · PDF page 275Context onlyOperational target, not a raw-water health limit. WHO describes large supplies achieving 0.5 NTU before disinfection at all times and an average of 0.2 NTU or less; small-supply feasibility differs.
Total hardness>1000.00mg CaCO3/LContext only — no numeric pass/failNo health-based guideline. Assess scaling and treatment requirements for the intended use.Source · PDF page 272Context onlyNo health-based guideline. Assess scaling and treatment requirements for the intended use.
Total alkalinity397.4mg CaCO3/LContext only — no standalone numeric pass/failNo numeric WHO drinking-water guideline is used in this library. Assess buffering, pH and scaling in process design.Source · PDF page 274Context onlyNo numeric WHO drinking-water guideline is used in this library. Assess buffering, pH and scaling in process design.
Calcium>400.000mg Ca/LNot configuredNot assessedNo matching reference configured; do not infer that WHO has no guidance.
Magnesium261.95mg Mg/LNot configuredNot assessedNo matching reference configured; do not infer that WHO has no guidance.
Chloride>1000.0mg Cl/LContext only — no numeric pass/failNo health-based guideline. Taste becomes more noticeable above about 250 mg/L.Source · PDF page 270Context onlyNo health-based guideline. Taste becomes more noticeable above about 250 mg/L.
Sulfate292.08mg SO4/LContext only — no numeric pass/failNo health-based guideline. Taste depends on the associated cation.Source · PDF page 275Context onlyNo health-based guideline. Taste depends on the associated cation.
Fluoride0.211mg F/L1.5 mg/LConsider total intake and water consumption when setting national standards.Source · PDF page 581At or below referenceCompared on the reported analytical basis.
Nitrate2.262mg NO3/L50 mg/L as NO3 ionAs NO3 ion. Also assess nitrate/50 + nitrite/3 <= 1, both as ions in mg/L.Source · PDF page 582At or below referenceCompared on the reported analytical basis.
Nitrite0.027mg NO2/L3 mg/L as NO2 ionAs NO2 ion. Also assess nitrate/50 + nitrite/3 <= 1, both as ions in mg/L.Source · PDF page 582At or below referenceCompared on the reported analytical basis.
Aluminium<0.040mg Al/LContext only — no numeric pass/failNo guideline value. Coagulation-process optimization levels are not raw-water safety limits.Source · PDF page 270Context onlyNo guideline value. Coagulation-process optimization levels are not raw-water safety limits.
Orthophosphate<0.184mg PO4/LNot configuredNot assessedNo matching reference configured; do not infer that WHO has no guidance.
Phosphate<0.1840mg PO4/LNot configuredNot assessedNo matching reference configured; do not infer that WHO has no guidance.
TOC45.11mg/LNot configuredNot assessedNo matching reference configured; do not infer that WHO has no guidance.

SAMPLE CO-03 · REFERENCE SCREENING

What these results indicate

0 above reference / detected3 at or below reference / not detected5 not assessed8 context only

No exceedance was identified among the results that could be compared. This does not establish that the water meets all WHO guidance: unassessed results, missing tests and source conditions remain relevant.

Combined nitrate and nitrite: nitrate/50 + nitrite/3 = 0.0542 (ion concentrations in mg/L). This is at or below the WHO combined reference of 1. This calculation uses exact, comparable results only.

Microbial evidence gap: this record has no separately identified E. coli or thermotolerant/faecal coliform result. Total coliforms and general bacterial counts do not replace that test.

Unresolved comparisons: review the reasons beside each result. ND/BLQ without a numeric limit, ambiguous units and unspecified chemical forms are not counted as compliant results.

Treatment options for this sample

Evaluate clarification and ultrafiltration

Trigger: Turbidity = 110 NTU; screening level > 1 NTU.

Review coagulation/flocculation and sedimentation for elevated or variable solids, followed by filtration or UF where appropriate. Confirm seasonal peaks, particle characteristics and organic matter; use jar or pilot tests to select pretreatment. Include a suitable disinfection barrier for drinking-water use.

GlobalUF raw-water screening trigger (>1 NTU); WHO treatment/disinfection turbidity guidance is context-dependent, not a raw-water health limit.

Explore Ultrafiltration membranes →

Automatically generated screening from this sample record and the cited reference set. This is not an engineer-approved design, a national compliance certificate or a declaration that untreated water is safe to drink.

Source and interpretation

Results describe this sample only. They do not represent country-wide conditions or establish drinking-water safety.

This is a sample record, not a treatment specification. A process design needs a current, representative source-water analysis and the intended product-water requirements.

WHO drinking-water guidance is used for screening, not certification of untreated source water. TDS categories describe palatability, not overall drinking-water safety. Original dates and laboratory details remain in the source archive.

Download WHO Drinking-water Quality Guidelines (2026 PDF)WHO source document · PDF · approximately 6 MB

FROM WATER ANALYSIS TO PROJECT REQUIREMENTS

Discuss your water quality with our engineering team

Tell us about your source water, required capacity and intended use. Our team can help review the data and define the next engineering steps.

Consult our engineering team
Email Icon Phone Icon WhatsApp Icon Messenger Icon